EXPLORE BY SOLUTIONS & TECHNOLOGIES
ForSField™ G-121 protective coating is a high-performance, two part protective coating designed to provide superior protection for steel or concrete structures in corrosive environments. It has excellent adhesion to metal, concrete, and galvanized metal. G-121 is designed to be brush and roller applied and can be used as a primer, tie coat, top coat, and for chemical immersion service.
Features and Benefits
ForSField™ SG-11 protective coating is a surface tolerant, zero VOC, HAPs free, direct to metal (DTM), multipurpose, two part protective coating designed for spray applications. It has excellent adhesion to metal, concrete, and galvanized substrates. Its main purpose is to protect substrates from corrosion and impart superior chemical resistance. Can be used as a primer, tie coat, topcoat, and for chemical immersion service.
Features and Benefits
ForSField™ TZ-904 protective coating is a polysulfide-modified novolac epoxy coating which features zero VOC, high-build capability and with outstanding protection for steel structures in corrosive marine environments. It applies easily to both flat surfaces and edges with excellent performance and durability. Specified by the United States Navy on the UFGS 09 97 13.26 (Coating of Steel Waterfront Structures, Zero VOCs, (SZC) Splash Zone Coating).
RiteLiner 100 is a two part 1:1 one coat high build Novolac Modified Epoxy with low VOC ultra-low HAPS, with excellent adhesion designed for direct to-metal (DTM) applications where excellent corrosion, chemical, and abrasion resistance is required. It is especially suitable for metal tank liner applications requiring excellent resistance to hydrocarbons, alcohols, and petroleum products.
RiteLiner 200 is two part, 1:1, one coat, high build, Novolac Modified Epoxy with low VOC ultra-low haps, and excellent adhesion designed for direct-to-metal (DTM) applications when you require excellent resistance to corrosion, chemical, and abrasion. It is especially suitable for metal tank liner applications requiring excellent resistance to hydrocarbons, alcohols, and petroleum products.
RitePoxi RP One Coat Marine Epoxy is a two component, phenalkamine epoxy designed for applications where excellent corrosion, moisture and water barrier properties are required. RP One Coat Marine Epoxy is high solids, high build and will cure at temperatures as low as 10°F in the presence of moisture. This product is especially suitable for marine and water submerged applications.
RitePoxi RP Two Coat Marine Epoxy is a two component, phenalkamine epoxy designed for applications where excellent corrosion, moisture and water barrier properties are required. RP Two Coat Marine is high solids and will cure at very low temperatures and in the presence of moisture. This product is especially suitable for marine and water submerged applications.
RitePoxi CTF100 is a two component, filled epoxy with excellent corrosion, moisture and water barrier resistance properties. CTF100 is high solids, high build and will cure at very low temperatures and in the presence of moisture. This product is suitable for a conventional coal tar epoxy replacement and conforms to SSPC #16 section 5.9-5.15, physical property requirements for coal tar epoxies.
RitePoxi RP Fast Dry Epoxy Primer is a two component, epoxy primer designed for applications where excellent corrosion, moisture and water barrier properties are required. RitePoxi RP high build epoxy primer is especially suitable for marine and water submerged applications. Typical uses include barges, drilling rigs, tanks, heavy duty structural steel, and pipes.
RitePoxi RP High Build Epoxy Primer is a two component, epoxy polyamide primer designed for applications where excellent corrosion, chemical, moisture and water barrier properties are required.
Typical applications include: Railcar exteriors, tank exteriors, structural steel, water towers
Features and Benefits
RiteZinc RZ 1K Series is a one component Zinc Rich Epoxy designed for Direct to Metal application where superior corrosion resistance is required. There is 85% zinc in the dried film to cathodically (galvanic) protect ferrous metals such as steel and iron. With the appropriate topcoat, RiteZinc RZ Series is suitable for severe environments including offshore, underground, caustic, and immersion service.
RiteZinc RZ 2K Series is a two component Zinc Rich Epoxy designed for Direct to Metal applications where superior corrosion resistance is required. There is 88% zinc in the dried film to cathodically (galvanic) protect ferrous metals such as steel and iron. With the appropriate topcoat, RiteZinc RZ 2k Series is suitable for severe environments including offshore, underground, caustic, and immersion service.
RiteThane RT Direct To Metal Urethane is a high build isocyanate cured acrylic urethane for industrial exterior direct to metal applications requiring excellent weathering, corrosion and chemical resistance. Sufficient film build can be achieved with a single coat application. Typical uses include; railcar exteriors, watertowers, storage tanks, and structural steel.
RiteThane High Solids Urethane Topcoat is a high build acrylic urethane for industrial exterior applications requiring excellent weathering, corrosion and chemical resistance.
RiteFloat (UI 7500) is a closed cell polyurethane foam internal and external pontoons of floating roof storage tanks. The purpose of installing the RiteFloat in pontoons is to prevent them from leaking and causing the roof to sink. RiteFloat acts as a fire retardant and provides corrosion resistance to water and hydrocarbons including crude oil, diesel, gasoline, and jet fuel. Double wall tanks and vessels, such as barges, can use this foams as well.
Meets or exceeds Mil Spec P-21929B
RiteSiloxane RPSX Series is a two component, Epoxy Polysiloxane for applications where you need excellent corrosion, chemical, moisture and UV resistance.
Features and Benefits
RiteKyd RK Primer is a high solids, fast dry, low emissions, modified alkyd primer for industrial interior or exterior direct to metal applications that require good weathering and corrosion resistance.
RiteKyd RK Topcoat is a fast dry, high solids, low VOC & HAPs, direct to metal, air cured modified alkyd coating for industrial exterior application that require good weather and corrosion resistance. You can achieve sufficient film build with a single coat application.
RiteHeat RH100/RH101 are low VOC, direct to metal, air cured silicone coatings for industrial interior and exterior applications that require excellent heat resistance, weather, corrosion and water resistance. Sufficient film build can be achieved with a single coat application.
RiteHeat RH102 is an air curd, direct to metal, silicone modified coating for industrial interior and exterior applications requiring excellent heat resistance, weathering, corrosion and water resistance. A single coat application can achieve sufficient film build.
RiteCrylic RC Series is a low VOC, water-based, elastomeric acrylic coating designed for exterior applications over a variety of substrates including asphalt and metal roofing. Fiber filling in RiteCrylic RC Series prevents cracking during expansion and contraction and has excellent water and UV resistance.
HAVE A QUESTION OR CAN’T FIND WHAT YOU’RE LOOKING FOR?
or call customer service at 281-569-3500
